Alpha ECG-125 Manuál s instrukcemi Strana 32

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 48
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 31
32
INSPECTING AND CLEANING THE FAN BELTS AND PULLEYS
1. With the fan belt removed, you can now check and clean it using a mild detergent.
The fan belt will need to be replaced if it is frayed or showing signs of wear.
2. The pulley should also be cleaned with a mild detergent.
3. Rotate the pulley by hand to check for bearing play and wear.
4. Make sure to fully clean the inside area of the large pulley where the pulley meets the
spindle to prevent slippage.
REINSTALLING THE INNER FAN BELT
1. Reinstallthebottompulleywiththerecessfacingthespindleandhousing(seegure
38).Pressthespindlelockbutton(seegure25)whileinstallingtheangenutand
lock in place.
2. Place the fan belt around the top of the large pulley, guide the other side of the belt
againstthesmallpulleywithyourindexngerwhileturningtheangenut.Aftertwo
or three turns the fan belt should center itself.
3. Reinstalltheinnerfanbeltcoverandatheadscrew.
Figure-37
Figure-38
Cleaning fan belt and pulleys
Clean the dust and
buildup in this recessed
area before reinstalling.
Inner fan belt Installation
Zobrazit stránku 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Komentáře k této Příručce

Žádné komentáře