Alpha ECG-125 Manuál s instrukcemi stáhnout pdf (Strana 18)

3. With the dust hose attached

to the tool, you can now install

the dust bag onto the dust bag

holder.

4. Open up the hook and loop strap

and slide the hose end into bag

until the end of the bag is even

with shoulder on the hose end.

Tighten the hook and loop strap

so the strap is behind the raised

liponthehosetting.

5. When in use, the dust bag and

hoseshouldlieatontheground.Whenthebagisnewitwillnotinate

immediately.Astheporesinthebagbecomeclogged,thebagwillstarttoinate.

Note:Asthebagllsupandcreatesbackpressure,thesuctionwilldecrease.Whendust

is not being removed from the work surface, you should check the fan belts and/or

replace the bag.

Hook & Loop Strap

Dust Bag Hose

Shoulder

Dust Bag Holder Raised Lip

Figure-10

Dust Bag Holder and Dust Bag

Figure-11

Hose Fitting with Hook & Loop Strap Secured

Figure-12

Dust Bag

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Žádné komentáře

Alpha ECG-125 Manuál s instrukcemi Strana 18